As the famous saying goes, “Prevention is better than cure”, same thing applies with aircon. We all need to understand the importance of maintaining the optimum performance of our aircon systems at home, rather than take them to an aircon “doctor” when signs and symptoms of system deterioration is starting to show.
In Singapore, having an aircon system at home is definitely worth your money, especially now that constant exposure to the heat of the sun is really exhausting. And for that, we employ ways to keep ourselves and our family comfortably cool.
Here are some ways you can do your own aircon maintenance for your aircon unit.
Regularly check the Freon level of your aircon system
Freon is trademark for liquid or gaseous fluorinated hydrocarbons used predominantly as refrigerants. Low Freon level causes your aircon to overheat and shut down. If your Freon level is low, it usually indicates that there might be a leak in your system. For that, you need a qualified aircon servicing technician here in Singapore like aircon master to fix the leak and test the repair. He should also be the one to help you charge the system with right amount of refrigerant.
Reminder: clear the condenser during aircon maintenance
The condenser is the part of an entire AC system that is seen from the outside the house. It is important that you regularly clean it by removing any dirt, dust, lint, and leaves that might have accumulated in the condenser. If you don’t clear these blockages away, they may prevent the AC system from working efficiently. And in the long run, your cooling unit may get damaged.
Clean evaporator coil to reduce aircon repair
When your AC unit has been used for a long time, the evaporator coil will be full of dirt and that will reduce the flow of air. Too much dirt will also insulate the coil, and as a result, its ability to absorb heat is reduced. Thus, it is necessary to clean the evaporator coil from time to time to minimize aircon servicing.
Check electrical connections
Have a regular check-up of the compressor and fan. These parts can wear out especially when there is frequent turning on and off of your AC system. Furthermore, a common problem in many systems is that wires and terminals can be damaged slowly by chemical action. Thus, there is really a need to check electrical connections.
Common Problems of AC Systems
The root cause of faulty air-condition systems is poor installation. When our AC units are installed improperly, ducts may have leaks which are one factor of low airflow. With inadequate maintenance and poor service procedures, problems can even get worst and unmanageable over time. To ensure proper installation of your AC unit, let airconmaster.sg from Singapore install your air conditioning system for you.
A lot of times, the amount of refrigerant that is in the system does not match the specifications provided by the aircon manufacturer. To avoid having premature aircon servicing, proper refrigerant charging must be performed during the installation. Otherwise, your aircon system will function poorly and inefficiently and will require more frequent aircon repair.
In general, aircon manufacturers in Singapore design and make quality aircon units that have the capability to withstand rough handling and require less aircon servicing. However, we need to understand that the different components or parts of our AC units such as filters, coils, and fins need maintenance on a regular basis in order for it to maintain its optimum performance through time. Think of it this way: you are continuously using your AC unit without proper care and regular aircon maintenance. In certainty, the system will slowly deteriorate.
NEO Food Web is a project of the Northeast Ohio Local Food System Assessment and Plan.